The fully automatic head-hanging folding mask machine is a machine for producing masks. The fully automatic head-hanging folding mask machine manufactures various masks with certain filtering properties through hot pressing, folding molding, ultrasonic welding, scrap cutting, and nose strip and ear welding. Mask production equipment is not a single machine. It requires the cooperation of multiple machines to complete various processes. The more popular mask equipment on the market include: cup mask machine, non-woven flat mask machine, N95 mask machine, 3M9001/9002 folding mask machine Machine, duckbill mask machine, three-dimensional dust mask machine, etc.

What are the functions and characteristics of the fully automatic head-hanging folding mask machine? Let's analyze it together.

1. The main body of folding masks such as 3M 9001 and 9002 can be processed in one step. 2. PLC automatic control, automatic counting. 3. The adjustment device is simple and refueling is convenient. 4. Using swappable molds, molds can be quickly replaced to produce different types of masks. 5. The whole machine is made of aluminum alloy, which is beautiful, strong and rust-free. 7. Advanced feeding and receiving devices. 8. High stability and low failure rate.

What should you pay attention to when using a fully automatic head-hanging folding mask machine? Let's analyze it together.

1. The pressure of each component should be appropriately adjusted to reduce the load on the entire machine. 2. When the mask machine is started, all raw materials must be manually pulled into the welding mold before the equipment can produce normally. 3. All bearings should be inspected regularly to ensure normal operation during operation. 4. Before turning on the mask machine, the ultrasonic welding machine should be turned on first to avoid excessive load and burning out the ultrasonic welding machine.

How to perform daily maintenance on the fully automatic head-hanging folding mask machine? Let's analyze it together.

1. Check whether the machine's transmission system, pneumatic system, ultrasonic system and appearance are clean, and clean them regularly.

2. Check whether the connecting screws of the transmission components are loose. 3. Check whether the lubricating oil of the reducer is sufficient. Generally, the lubricating oil needs to be replaced every 1000-1500 hours.

4. Pneumatic system of ultrasonic port equipment: Check whether there is water in the air filter, check whether the air pipe and cylinder are leaking, and whether the direction and operation of the magnetic sensor of the cylinder are normal.

What is the production process of the fully automatic head-hanging folding mask machine? Let's analyze it together.

1. The fully automatic head-hanging folding mask machine includes a welded ear strap device, the upper fixed plate is fixed on the workbench, and the middle inserting plate is installed longitudinally on the workbench.

2. The ultrasonic welding heads are symmetrically fixed on the bottom surface of the fixed plate, and the ultrasonic welding heads are perpendicular to the middle inserting plate.

3. A sliding clamp track is provided below the ultrasonic welding head, and a sliding clamp is provided on the sliding clamp track. The center line of the sliding clamp track is perpendicular to the middle inserting plate.

        4. There is a rotating clamp driving seat under the middle plate. The center line of the rotating clamp driving seat is perpendicular to the middle plate. There is a symmetrical rotating clamp that can move and rotate in three directions on the rotating clamp driving seat. The rotating clamp is located at the ultrasonic welding head. below.

5. The ear straps are welded to the mask through the ear strap welding device, realizing fully automated production and greatly improving production efficiency. The accurate welding position of the ear straps can save packaging materials.